My Cart

Close
FREE SHIPPING on most orders over $50

K Rain

K RAIN CONTROLLER FOR 12 STATION

$318.40 USD
K-210

FEATURES:

  • 12 station model for residential and light commercial applications with a 110-volt internal transmitter.
  • 8 fully independent programs allowing up to 8 starts per program, a maximum of 64 starts per day.
  • Indoor/Outdoor usage.
  • Water conservation allows for quick adjustment of watering durations in 10% increments, from 10% to 200.
  • Rain sensor ready – accepts rain sensors and allows individual stations to be set and controlled by the sensor.
  • Flexible manual operations – automatic, semi-automatic and single station manual.
  • System test allows for a full system check for valve operation.
  • Permanent memory saves programs during power outages.
  • Weatherproof enclosure ensures a long product life.
  • 2-year Limited Warranty.

SPECIFICATIONS:

  • Dimensions: 9-3/8” H x 10-1/4” W x 4-1/8” D
  • Station run times: 1 min - 12 hours 59 min.
  • Programs: 8
  • Start Times: 8 per program
  • Water Schedule: 7-day calendar w/ individual day selection or 1- 15-day interval watering, or 365-day calendar for Odd/Even day watering.
  • Rain sensor ready inhibits automatic watering when wet conditions are detected by a rain sensor.
  • Two master valve/pump can be enabled or disabled by station or program.
  • Automatic, semi-automatic and single station manual operation.
  • Capable of programming remotely using a standard 9-volt battery. Permanent memory saves all programs during power outages.

 

ELECTRICAL SPECIFICATIONS:

  • Electrical Power Supply: 110-120 VAC/ 60 Hz/ 230 VAC 50 Hz.
  • Electrical Outputs: 24 Volt AC, 1.25 amp.
  • To Solenoid Valve: 24 VAC 50/60 Hz 0.75 amp max.
  • Total output load must not be exceeded by the valves and pump requirements.
  • Overload protection: Standard 20mm 1 amp fuse.
  • Power failure: 9-volt standard alkaline battery permanently maintains clock and programs. Has permanent memory so the data is always backed up during power outages.
  • Wiring: The output circuits should be installed and protected in accordance with wiring rules.