STERLING SERIES CONTROLLERS
Sterling Series Controllers offer 4, 8, 12, 18, 24, 30, & 36 stations models.
- Six independent programs that can run concurrently.
- Station timing adjustable from 1 minute to 24 hours in 1-minute increments. For misting applications, the time base in all six programs can be changed to seconds/minutes so that station timing is adjustable from 1 second to 24 minutes in 1-second increments.
- Up to 9 cycle start times per program; or, for misting applications, loop programming for unlimited cycles that can repeat immediately or after a programmed delay of 1 minute to 4 hours.
- Cycling can be started and stopped manually as well as automatically.
- Standard 50 VA transformer enables five 4-watt solenoids to operate simultaneously; or, for solenoids with the current draw at below .25 amps, up to 6 solenoids can operate simultaneously.
|STERLING-4||4 STATION STERLING CONTROLLER|
|STERLING-8||8 STATION STERLING CONTROLLER|
|STERLING-12||12 STATION STERLING CONTROLLER|
|STERLING-18||18 STATION STERLING CONTROLLER|
|STERLING-24||24 STATION STERLING CONTROLLER|
|STERLING-30||30 STATION STERLING CONTROLLER|
|STERLING-36||36 STATION STERLING CONTROLLER|
Input: 120 VAC @ 50 or 60 Hz.
Output: 24 VAC@50 VA, 1.5 Amp MAX
Maximum of three 4-watt solenoids per station. Standard 50 VA transformer allows up to five 4-watt solenoids to operate simultaneously; or, for solenoids with a current draw at or below .25 amps, up to 6 solenoids can operate simultaneously.
For more information about the Sterling Series Controllers, click on the links provided below:
- FAQ - https://www.bucknersuperior.com/wp-content/uploads/2017/02/Sterling-Controller-FAQ-w-photo-1.pdf
- Owner Manual - https://www.bucknersuperior.com/wp-content/uploads/2017/02/Sterling-Manual-1.pdf
- Misting Manual - https://www.bucknersuperior.com/wp-content/uploads/2017/02/sterling_misting_manual-3.pdf